Skip to main content

For most Florida Panhandle homes, holiday lights add anywhere from a couple of dollars to a noticeable chunk of the December electric bill. Where you land depends mostly on two things: whether your lights are LED or incandescent, and how many hours a day they stay on. You can work out your own number in a few minutes using the wattage printed on the box and the price per kilowatt-hour shown on your bill.

The simple math behind holiday lighting costs

Every electric bill in the Panhandle, whether it comes from FPL, CHELCO, Gulf Coast Electric, West Florida Electric, Escambia River Electric or Talquin, charges you for energy in kilowatt-hours (kWh). To estimate what a display costs, you only need three numbers:

  • Watts: the power each string, inflatable or projector draws. It is printed on the box, the tag near the plug, or the product listing.
  • Hours: how long the lights run each night, multiplied by the number of nights you leave them up.
  • Your rate: the energy charge per kWh on your bill. Use your own bill rather than a number you read online, because rates differ between utilities and change over time.

The formula is: watts × hours ÷ 1,000 = kWh. Then kWh × your rate = cost. That is all there is to it, and it works for any electrical device in your home.

LED vs incandescent: why the bulb type matters most

The single biggest factor is the type of bulb. Older incandescent strings turn most of their power into heat. LED strings produce the same glow with a small fraction of the power. Wattage varies by brand and string length, so always check your own labels, but the general pattern looks like this:

Light typeTypical drawNotes
Incandescent mini lights, 100-count stringAround 40 wattsCommon on older strings stored in the attic
LED mini lights, 100-count stringOften under 10 wattsMany are rated around 5 watts
Incandescent C9 bulbsAbout 7 watts per bulbA 25-bulb strand can draw well over 150 watts
LED C9 bulbsUsually around 1 watt or less per bulbSame look along a roofline for far less power

In other words, swapping a box of old incandescent strings for LED versions can cut the lighting part of your display by roughly 80 to 90 percent.

A worked example for a typical display

Say you put up ten 100-count mini-light strings and run them six hours a night from Thanksgiving weekend through New Year's, about 40 nights.

  • Incandescent: 10 strings × 40 watts = 400 watts. 400 × 6 hours × 40 nights ÷ 1,000 = 96 kWh for the season.
  • LED: 10 strings × 5 watts = 50 watts. 50 × 6 × 40 ÷ 1,000 = 12 kWh for the season.

To turn that into dollars, multiply by the rate on your bill. As an illustration only, at 15 cents per kWh the incandescent display would cost about $14.40 for the season and the LED display about $1.80. Your actual rate may be higher or lower, so plug in your own.

Inflatables, projectors and animated displays

Strings of lights are not the only load. Yard inflatables use a small fan that runs the whole time they are standing, plus internal lights. Laser and image projectors, animated reindeer and light-synced music controllers each draw their own power. None of these have a standard wattage, so read the label on each one and add them to your total.

Inflatables are the item most people underestimate, because the blower has to run continuously to keep them upright. If you have several, they can easily use more than all of your LED strings combined. A timer that shuts them off overnight helps a great deal.

Ways to cut the cost without dimming the display

  • Switch to LED as old strings fail. You do not have to replace everything at once. Retire incandescent strings as they burn out.
  • Use a timer or smart plug. Running lights from dusk to 11 pm instead of all night can cut hours, and therefore cost, by half or more.
  • Turn off inflatables when you go to bed. Nobody is looking at 3 am.
  • Consider battery or solar-powered decorations for spots far from an outlet, such as a mailbox or garden bed. They avoid long extension cord runs.
  • Do not leave indoor trees lit when no one is home. It saves a little energy and is safer.

Safety tips for Gulf Coast weather

December in the Panhandle can bring heavy rain, wind and the occasional freeze, so outdoor displays need a little extra care:

  • Plug outdoor lights only into GFCI-protected outlets, and use cords and strings rated for outdoor use.
  • Keep plug connections off the ground and out of puddles. Wrapping a connection in a plastic bag traps water; a covered outdoor connector box is better.
  • Check strings for cracked insulation or broken sockets before hanging them, and throw out damaged ones.
  • Do not overload an outlet or daisy-chain more strings than the packaging allows.
  • Use plastic clips rather than nails or staples, which can pierce wire insulation.

If you have solar panels, keep decorations off the array. Do not clip lights to panel frames or racking, run cords under modules, or walk on the panels to reach the roofline. Attaching things to the array can damage wiring and panels and can shade cells. Hang roofline lights along the gutters and eaves instead.

Do solar panels cover your holiday lighting?

Holiday lights run after dark, when solar panels are not producing. Whether solar still helps depends on how your utility handles exports. FPL, which now serves the former Gulf Power territory, credits net-metered exports at the retail rate, so energy your panels send to the grid during sunny December days offsets kWh you use at night on the same bill. Electric co-ops and city utilities set their own net metering rules, so the value of those daytime exports can be different if you are a CHELCO, Gulf Coast Electric, West Florida Electric, Escambia River Electric or Talquin member.

A home battery can also cover evening loads, but holiday lighting alone is rarely a reason to buy one. In a typical home, heating, water heating and cooking during the holidays use far more energy than an LED display. If you are curious how solar would fit your home, you can learn more about new solar installations from MSM Solar, including free site surveys and written quotes.

Spotting the effect on your December bill

Holiday lights are rarely the main reason a winter bill jumps. Cold snaps that make a heat pump run longer, guests, extra cooking and electric water heating usually matter more. To see what your display really costs, compare the kWh line on your December bill with the same month last year, rather than the dollar total, since rates and fees can change. If the jump is much larger than your lighting math suggests, look at heating first.

Homeowners from Crestview to Pensacola and Panama City can use the same approach: watts, hours and the rate on your own bill.

Solar Cost Calculator – Florida Panhandle Only

* Estimate based on $3.25 per watt for solar installation.
* For Tesla Powerwall 3 Batteries, $15,000 for the first battery, $12,000 for each additional battery.
* Other variations and types of Batteries are available.





Frequently asked questions

Is it cheaper to leave Christmas lights on all night or turn them off?

Turning them off is always cheaper. Cost is directly proportional to hours of use, so cutting a 12-hour night to 5 hours cuts the lighting cost by more than half. There is no meaningful energy cost to switching lights on and off.

Do LED Christmas lights really save that much?

Yes. A 100-count LED mini string often draws under 10 watts, compared with around 40 watts for a similar incandescent string. Larger C7 and C9 bulbs show an even bigger difference.

How do I find the rate to use in my calculation?

Look at the energy charge per kWh on your bill. Some bills split it into several lines, such as base energy and fuel. Add the per-kWh lines together for a closer estimate.

Can I run holiday lights from my solar panels or battery during an outage?

Only if your system includes a battery set up for backup. Standard grid-tied solar without a battery shuts off during a utility outage. With a battery, it is usually smarter to save stored energy for refrigeration, lights and fans.

Conclusion

MSM Solar works with homeowners in Quincy, Rosemary Beach, Seaside, St. George Island and Wewahitchka, and in every town between Pensacola and Apalachicola.

Holiday lights do not have to be a mystery on your electric bill. Multiply watts by hours, divide by 1,000 and multiply by the rate on your own bill. For most homes, switching to LED strings and putting the display on a timer keeps the cost small. Keep outdoor connections dry and protected, and keep decorations off any solar panels. If you have questions about solar for your home, call MSM Solar in Crestview at (850) 737-5197; a real person calls back within two business days.