Skip to main content

Storm Watch is a Tesla Powerwall setting that charges your battery to full when severe weather is forecast for your area, so you have as much stored energy as possible if the grid goes down. For Florida Panhandle homeowners it is worth turning on before hurricane season, and worth checking a few related settings so it actually does its job when a storm is approaching.

What Storm Watch does

Most of the time a Powerwall cycles up and down. Depending on the mode you choose in the Tesla app, it may store midday solar and use it in the evening, or it may hold a set amount in reserve and leave the rest for everyday use. That is efficient on a normal day, but it means the battery might be half empty at the moment a storm knocks out power.

Storm Watch changes that behavior temporarily. When it is turned on and a qualifying weather alert is issued for your location, the Powerwall stops its normal routine, charges to full and holds that charge until the alert ends. Once the threat passes, it returns to whatever mode you had set before.

The point is simple: if the power goes out during the storm, you start the outage with a full battery instead of whatever happened to be left over.

How Storm Watch knows a storm is coming

Storm Watch relies on official severe weather alerts for your address, such as those issued by the National Weather Service. The Powerwall needs a working internet connection to receive them, through Wi-Fi, an Ethernet cable or a cellular connection where your equipment has one.

That has two practical consequences:

  • If your Powerwall is offline, Storm Watch cannot react. A router that was unplugged months ago or a changed Wi-Fi password can quietly disable it.
  • It reacts to alerts, not to a hunch. If you are worried about a system that has not yet triggered a warning for your area, you can raise your backup reserve by hand in the app instead of waiting.

When Storm Watch activates, the app normally sends a notification, so it is also worth making sure notifications for the Tesla app are allowed on your phone.

How to turn Storm Watch on and check it

In the Tesla app, Storm Watch is found in the Powerwall settings. Turn it on, and make sure app notifications are enabled. While you are there, check three other things:

  1. Connection status. The app should show recent data. If it shows the system as offline, fix the connection before storm season.
  2. Backup reserve. This is the share of the battery always held back for outages. A higher reserve gives you more cushion if an outage arrives without warning, such as a summer thunderstorm or a car hitting a pole.
  3. Operating mode. Self-powered and time-based modes both work with Storm Watch, but it helps to know which one you are using so the battery's everyday behavior does not surprise you.

If you are not sure how your system was set up, or the app shows errors, our solar system service calls page explains how a service visit works, with pricing quoted up front.

Why Storm Watch may not fill your battery all the way

Homeowners are sometimes surprised to see a battery sitting below 100% during an active alert. There are a few common reasons.

  • Grid charging is not allowed on that system. Depending on how the system was configured and approved, a Powerwall may only be permitted to charge from solar. In that case Storm Watch can only fill it as fast as the panels produce.
  • Short notice or poor sun. If an alert arrives at night or under heavy cloud, a solar-only system may not have enough production to top off before the weather hits.
  • The system is offline. No internet connection means no alert and no change in behavior.
  • The event was ended manually. Anyone with access to the app can stop Storm Watch for a given alert.

If your battery regularly fails to fill when you expect it to, it is worth having the configuration reviewed rather than guessing.

Storm Watch, solar and your utility in the Panhandle

Storm Watch itself works the same everywhere, but how much it matters depends on your setup. FPL now serves the former Gulf Power territory and credits net-metered solar exports at the retail rate. The local co-ops, including CHELCO, Gulf Coast Electric, West Florida Electric, Escambia River Electric and Talquin, and city-owned utilities set their own interconnection and metering rules. Those rules can affect how a battery is allowed to charge and discharge, so the right settings in Crestview on CHELCO can differ from the right settings in Pensacola on FPL.

One thing does not change: a grid-tied solar system without a battery shuts off when the grid goes down, for the safety of utility crews working on the lines. The battery is what lets your solar keep running your home during an outage, which is why keeping it charged before a storm matters so much.

Getting more out of a full battery during an outage

A full battery is a head start, not unlimited power. Long Panhandle outages after a hurricane can run for days, and the sun may not return right away. A few habits stretch your stored energy:

  • Run the air conditioning sparingly and at a higher setting, or cool one room rather than the whole house.
  • Leave large loads like the pool pump, electric dryer, oven and electric water heater off unless you truly need them.
  • Keep the refrigerator and freezer closed as much as possible.
  • Charge phones, laptops and medical devices early, while the battery is fullest.
  • Watch the app. It shows how fast you are using energy and how much solar is coming in, so you can adjust.

Once skies clear, solar production during the day recharges the battery, which is why a battery paired with panels can carry a home through a multi-day outage far better than a battery alone.

Preparing your battery before hurricane season

Storm Watch is one item on a short pre-season list for battery owners:

  1. Confirm the Powerwall is online and reporting in the app.
  2. Turn Storm Watch on and allow notifications.
  3. Decide on a backup reserve you are comfortable with for surprise outages.
  4. Know which circuits the battery backs up. Some systems back up the whole home and others only selected circuits.
  5. Check that the panels are clean of debris and that nothing new is shading them.
  6. After a storm, look over the panels, conduit and equipment for visible damage before relying on the system.

If you have solar but no battery yet, our solar system additions page covers adding storage to an existing system. A first Powerwall 3 typically runs about $15,000 installed, and we provide a free site survey and written quote before any work.

Solar Cost Calculator – Florida Panhandle Only

* Estimate based on $3.25 per watt for solar installation.
* For Tesla Powerwall 3 Batteries, $15,000 for the first battery, $12,000 for each additional battery.
* Other variations and types of Batteries are available.





Frequently asked questions

Does Storm Watch cost anything?

No. It is a setting in the Tesla app for Powerwall owners. It only needs the battery to be online.

Will Storm Watch charge my battery from the grid?

It can if your system is configured and permitted to charge from the grid. If it is set to charge from solar only, Storm Watch can only fill the battery with solar production.

Can I turn Storm Watch off for one storm?

Yes. When an event is active you can end it in the app, and the battery returns to its normal mode. Storm Watch stays turned on for future alerts unless you switch it off.

What if my Powerwall says it is offline?

Check your router and Wi-Fi password first. If the connection still fails, a service call can sort out the communication setup so alerts reach the battery again.

Conclusion

MSM Solar works with homeowners in Miramar Beach, Pace, Perdido Key, Ponce de Leon, Quincy and Rosemary Beach, and in every town between Pensacola and Apalachicola.

Storm Watch is one of the simplest ways to make a home battery more useful in the Florida Panhandle: turn it on, keep the Powerwall online and check your backup reserve before hurricane season. If your battery does not behave the way you expect during an alert, MSM Solar, a Florida Certified Solar Contractor (CVC57236) based in Crestview, can review the setup on any brand and age of system. Call (850) 737-5197; a real person calls back within 2 business days.